The weather’s heating up in Myrtle Beach, and that means one thing—it’s time to get your residential pool summer-ready. After months of sitting idle, your backyard oasis needs more than just a quick skim. A proper seasonal maintenance routine helps protect your investment, keeps swimmers safe and ensures your pool stays crystal clear all summer long.
Here’s what every homeowner should do to prepare their pool before diving into the season.
How to Get Your Residential Pool Ready for Summer
1. Remove the Pool Cover Carefully
Start by clearing off leaves and debris before taking off the cover. Use a leaf blower or broom to keep gunk from falling into the water. Dry and store the cover in a clean, shaded area so it’s ready for next season.
2. Clean and Inspect the Pool
Give your pool a good scrub. Brush down the walls and steps, vacuum the bottom, and skim the surface. Take a close look at tiles, liners and the pool floor for cracks, stains or signs of wear. Catching problems early saves money later.
3. Check the Water Level
Winter and spring rains can raise or lower your pool’s water level. Adjust it so it hits the halfway point of the skimmer opening. That’s the sweet spot for optimal flow and filter function.
4. Inspect Equipment Thoroughly
Before flipping any switches, inspect your pump, filter, heater and chlorinator. Look for leaks, worn seals or disconnected parts. Make sure everything is clean and in working order before turning it on.
5. Prime and Start the Pump System
Once everything looks good, start your pump and filter system. Let it run for at least 24 hours before swimming. Watch the pressure gauge and listen for unusual noises that could signal trouble.
6. Balance the Water Chemistry
Test the water using strips or a professional-grade kit. You’ll need to adjust the pH, chlorine, alkalinity and calcium hardness levels to make the water safe and clear. Don’t forget to shock the pool if it’s been sitting closed for a while.
7. Add Start-Up Chemicals
Use a clarifier to help your filter trap tiny particles. Add an algaecide to fight off green, black or mustard algae before they bloom. Enzyme-based cleaners also break down leftover organic matter from the winter months.
8. Schedule a Professional Inspection
Even if you’ve handled all the basics, a professional eye can catch things you might miss. That’s where Elko comes in.
Why Hire a Pro for Your Residential Pool?
Let’s face it—getting your pool ready takes more than just elbow grease. A professional pool service like Elko Spas, Billiards & Pools brings experience, high-grade tools and an eye for detail. We don’t just clean—we inspect, balance, repair and get your pool in peak shape for summer fun.
Hiring pros saves time, prevents expensive damage and ensures everything’s up to code. We know Myrtle Beach weather and how it affects your residential pool—so we can help you get ahead of any seasonal issues before they ruin your summer plans.
Make a Splash This Summer—Without the Stress
You’ve got enough to do without worrying about pool chemistry or filter clogs. Let Elko handle the heavy lifting. Our team makes seasonal maintenance quick, easy and stress-free, so your residential pool is always ready for fun in the sun. Call Elko Spas Billiards & Pools (843) 294- ELKO (3556) today to schedule your pool opening and kick off the season the right way!
FAQs
1. When should I open my pool for the summer in Myrtle Beach?
In Myrtle Beach, it’s best to open your pool in early to mid-April. This timing takes advantage of the warming temperatures, allowing you to address any maintenance needs before the peak swimming season. Opening your pool early also helps prevent algae growth that can occur in stagnant water as the weather heats up.
2. What steps are essential to prepare my pool for summer?
To ensure your pool is ready for summer fun, follow these key steps:
1. Remove and clean the pool cover: Carefully take off the cover, clean it thoroughly, and store it properly to prevent damage.
2. Inspect the pool structure: Check for any cracks, leaks, or damage to the pool walls and floor.
3. Clean the pool: Skim debris from the surface, vacuum the bottom, and brush the walls to remove any dirt or algae.
4. Check and service equipment: Inspect the pump, filter, and other equipment to ensure they’re functioning correctly.
5. Test and balance the water chemistry: Use a testing kit to check pH, chlorine, and alkalinity levels, adjusting as necessary to maintain safe and clean water.
6. Run the filtration system: Allow the system to run continuously for at least 24 hours to circulate the water and distribute chemicals evenly.
By following these steps, you’ll create a safe and inviting environment for swimmers.
3. Why should I consider hiring a professional for pool maintenance?
Hiring a professional pool maintenance service gives you peace of mind and saves you time. Professionals bring years of experience and know what to look for before small issues turn into costly repairs. They handle the hard work—testing and balancing chemicals, checking equipment, cleaning the pool and making sure everything runs smoothly—so you don’t have to. When your schedule gets busy, regular maintenance can easily fall through the cracks. A reliable pool service keeps everything on track, so your water stays clean, safe and ready for fun. In a place like Myrtle Beach, where heat and humidity can throw off water balance fast, trusting a team like Elko Spas, Billiards & Pools means your pool always gets expert care.
